Most Douglas fir is sold through the placing of custom orders;

 Please email your cutlist to jeff@creationwoods.com to obtain a quote.

We may have some fir lumber on hand;

• A small amount of 1x4, 1x6 and 2x4 and 2x6 in 8 & 10 foot lenghts or longer may be available for pickup.

  Unless otherwise requested/specified, the material as quoted will be: 

    1) "standard or better" Douglas Fir lumber
    2) semi-rough/semi-smooth as produced by a bandsawn, with minimal, if any, wain or defect and 
    3) a little longer than specified and have untrimmed ends and 
    4) provided in nominal sizes (ie 2x2 = 1 1/2 x 1 1/2; 2x4 = 1 1/2 x 3 1/2). One inch material is 7/8 an inch thick.

    Although orders may be ready sooner, please allow 2 weeks to produce the material from the time the order is confirmed/placed.

We can make custom sized fir  lumber per your specifications up to 20 feet long.

Prices for fir lumber is $1.21 a board foot for less than 12 foot long, $1.33 per board foot for 12-20 feet long. . Add 10% for full dimension lumber. Add 10% for lumber 12 feet and longer. Timbers and beams can be manufactured up to 20 inches wide.