Most of the below slabs were cut at 2" thick and have one Natural Edges. Some are 6/4, 9/4 or 10/4.
The slabs are assigned number and also have the sizes indicated on them in thickness, length and widths. The widths are indicated by x/y..x/y.. pattern where x is the top surface measurement and y is the outside edge width of the natural/live edge. These slabs have been kiln dried down to ~ 10% and are stored outdoors under tarps. Their present moisture content will be atmospheric for NW Oregon (16-18%) but they should be stable and readily acclimated to their final environment.
|
|
Pricing: 1a - $460 1b - $350 |
|
Pricing: 2a - $450 2b - $500 |
|
|
Pricing: 3a - $550 3b - $550 |
|
|
|
Pricing: 4a - $550 4b - $550 |
|
4C 2" x 127" x 6/4 24/24.. 17/17'' (shown on left, upper slab) Pricing : 4C - $600 |
4d Pricing: $500 |
|
7a - combined sizes - 2" x 136+ x 36-48 Pricing: $1200 for pair |
|
SOLD | SOLD 7b - combined sizes - 2" x 136+ x 41-48 Pricing: $1300 for pair |
Top Slab only
available - measures 2" x 136+; widths are 21" on far end, 14" on near
end; 9" at narrowest and approximately 12" for balance. Pricing: $350 7c - combined sizes - 2" x 136+ x 32-36 The larger of this pair has been sold. Only the smaller one is available. |
|
SOLD | SOLD 7d - combined sizes - 1.5" x 126+ x 27-52 surface wavy and cracks as shown Pricing: $900 for pair (one slab a bit thick on narrowest end and the other slab a bit thin on the narrowest end.) |
#10 - Pricing $645 | |
#12 132" long, Hole, rot on end 10/4" thick; widths = 37/38, 30/31, 28/29, 28, 27, 28, 27/28, 28/30 |
#12 Pricing $825 |
# 13 133" long, punky on end, 10/4" thick; widths = 36, 28, 26, 26, 30, 24/27, 25/27, 24/25 |
#13 Pricing $1000 |
#14 132/141" long; 9/4" thick; Widths = 33/34, 25/26, 23/25, 24/25, 30, 20/23, 21/23 |
#14 Pricing $875 |
#15 110/134" long; 8/4 thick; Widths = 33,24, 21/23, 22/24, 29/30, 13/16 (bark on top) 16/19 diagonal saw cut on end. |
#15 Pricing $600 |