Douglas Fir - 10+  13+ Feet Long Natural Edge Slabs

See Other Table Slabs

The below shown slabs range from 10+ feet long to 13+ feet long.  They are approximately 3 1/2 in. thick and have two natural edges.  These slabs were cut November 2011 and are stacked, stickered and beginning the drying process with the ends of each slab painted to inhibit cracking.  Priced at ~$5.00 a board foot in "undried" condition for cash and carry sell.  Shipping is available - estimated cost for crating, and shipping in USA $350-$650 in USA.

The stack on left are 13+ foot long, ~3 1/2 in. thick and up to 44 in. wide.

The stack on left are 10+ foot long, ~3 1/2 in. thick and up to 38 in. wide.

Widths xx/xx indicate top and bottom widths inside of the bark as measured when first cut.  Expect some shrinkage during drying.

These slabs were cut from large Douglas fir logs with medium grain widths  and have few, if any knots.  With a couple exceptions the knots are quite small.   Some slabs are clear.  Some slabs exhibit all vertical grain.

The below are the only two slabs remaining from these two logs.
#8 
 158 in. long;
3 1/2 in. thick  39/42-36/38" wide

$749
#12
 158 in. long;
3 1/2 in. thick  6/24-16/24 (@ ~ 2 ft).- 18/24 wide

$299

See Other Table Slabs

The below shown slabs range from 8+ feet long to 13+ feet long.  Thicknesses vary from 2 1/2 to 4+ inches thick. Unless otherwise annotatedthe slabs have two natural edges most of which have the bark intact, although it is at the stage of easily being loosened and removed.  These slabs were cut November 2014 and are stacked, stickered and beginning the drying proces.  Priced at ~$5.00-$7 a board foot in "undried" condition for cash and carry sell.  Shipping is available - estimated cost for crating, and shipping in USA $350-$650 in USA.

The table below gives the details of the slabs. 

*Widths are given measured on each end inside of the bark when fresh cut as measured on the narrowest side of the slab unless otherwise noted in comments.  Slabs of the same length are sequentially numbered as they were cut; the width of the next slab indicates the width of the bottom of the previous slab.

Slab Number
(Month/year/#)
Price Thickness
Inches
Width*
Inches
Length
 inches
Comments:
1111 - 8 $749 3.5+
1111 - 12 $299 3.5+
1114 -1 $455 3.5+ 15-23-27 156
1114 -2 $575 3.5+ 25-30-33 156
1114 -3 $650 3.5+ 29-33-36 156
1114 -4 $685 3.5+ 32-35-39 156 oblong pitch seam on top (narrower) side of this slab
1114 -5 $600 3.5+ 33-34-41 156 this slab has a pitch seam/crack at 22" width about 1/2 of its length
1114 -6 $600 3.5+ 32-33-35* 156 *widths measured on wide side;  this slab has a pitch seam/crack at 19" width about 1/2 of its length
1114 -7 $600 3.5+ 28-29-36* 156 *widths measured on wide side; some cracking
1114 -9 $320 2.5+ 24-28-32 129
1114 -11 $575 4+ 31-30-34 129 Heart cut on 31" end.
1114 -12 $525 4+ 28-27-34* 129 *widths measured on wide side
1114 -13 $450 4+ 14-25-30 156* *the usable length is 134"; after that it has bark taper on surface.
1114 -14 $700 4+ 20-32-36 156
1114 -15 $780 4+ 29-35-41 156
1114 -16 $825 4+ 33-36-41 156
1114 -17 $750 4+ 33-34-39* 156 *widths measured on wide side
1114 -18 $650 4+ 31-29-36* 156 *widths measured on wide side
$
$

Sample Pictures of slabs cut 11/2014

Return to Top

 


 


Zapponet Computer Services, Rainier, Oregon
Contact Dave & Betty Weinberg
Copyright© 2008 Zapponet Computer Services
All rights reserved.